ICX267AK |
RFQ for ICX267AK Required Field |
 |
| Product | Manufacturers | Pack | D/C |
| ICX267AK | - | - | 00+ |
The ICX267AK is a diagonal 8mm (Type 1/2) interline CCD solid-state image sensor with a square pixel array and 1.45M effective pixels. Progressive scan allows all pixels' signals to be output independently. Also, the adoption of high frame rate readout mode supports 30 frames per second. This chip features an electronic shutter with variable charge-storage time which makes it possible to realize full-frame still image without a mechanical shutter. High resolution and high color reproductivity are achieved through the use of R, G, B primary color mosaic filters. Further, high sensitivity and low dark current are achieved through the adoption of HAD (Hole-Accumulation Diode) sensors.
This chip is suitable for applications such as electronic still cameras, PC input cameras, etc.
Features |
| • Progressive scan allows individual readout of the image signals from all pixels.• High horizontal and vertical resolution (both approx. 800TV-lines) still image without a mechanical shutter.• Supports high frame rate readout mode (effective 512 lines output, 30 frames/s)• Square pixel• Horizontal drive frequency: 28.636MHz• No voltage adjustments (reset gate and substrate bias are not adjusted.)• R, G, B primary color mosaic filters on chip• High resolution, high color reproductivity, high sensitivity, low dark current• Low smear, excellent antiblooming characteristics• Continuous variable-speed shutter |
| Item | Ratings | Unit | Remarks | |
| Against SUB | VDD, VOUT, RG SUB | 40 to +10 | V | |
| V2A, V2B SUB | 50 to +15 | V | ||
| V1, V3, VL SUB | 50 to +0.3 | V | ||
| H1, H2, GND SUB | 40 to +0.3 | V | ||
| CSUB SUB | 25 to | V | ||
| Against GND | VDD, VOUT, RG, CSUB GND | 0.3 to +18 | V | |
| V1, V2A, V2B, V3 GND | 10 to +18 | V | ||
| H1, H2 GND | 10 to +15 | V | ||
| Against VL | V2A, V2B VL | 0.3 to +28 | V | |
| V1, V3, H1, H2, GND VL | 0.3 to +15 | V | ||
| Between input clock pins |
Voltage difference between vertical clock input pins | to +15 | V | |
| H1 H2 | 16 to +16 | V | ||
| H1, H2 V3 | 16 to +16 | V | ||
| Storage temperature | 30 to +80 | °C | ||
